水肺潜水 Regulators & Octopus ELLIPSE BALANCED/MC 9 潜水呼吸调节器,调节器,调整器,备用调节器,一级头,二级头,价格,品牌,广东,江苏,山东,浙江,上海,北京,广州,天津,苏州,青岛,大连,海南,杭州

水肺潜水 Regulators & Octopus ELLIPSE BALANCED/MC 9 潜水呼吸调节器,调节器,调整器,备用调节器,一级头,二级头,价格,品牌,广东,江苏,山东,浙江,上海,北京,广州,天津,苏州,青岛,大连,海南,杭州

Other Views

30_1_V02_
30_1_V02_

ELLIPSE BALANCED/MC 9 呼吸调节器

Other videos

Cressi 最优秀的一款呼吸调节器 MC9/Ellipse Balanced 可让潜水员在最苛刻的条件下自由呼吸。超平衡一级头可在深水以及气瓶压力低时提供充足的气流。与完全可调二级头配对可保持不考虑气瓶压力时的持久性与轻松呼吸之间的平衡。易握呼吸阻力旋钮以及潜水/潜水前开关可让潜水员随时调整呼吸性能。 一级头 高级气流设计和特殊的辅助箱可保证根据最大吸入气流将压力降到最低点。 环保密封隔膜和弹簧可在冷水或者脏水中使用。 自动润滑、带保护罩气瓶可提供超级性能,并减少保养次数。 DIN 200/300 阀体为不锈钢材质,因此螺口不易意外损坏。 咬嘴采用 316 不锈钢制成便于更换。 重量轻且外包防碰撞高弹性外壳。 高压端口(HP)2 个...

Cressi 最优秀的一款呼吸调节器 MC9/Ellipse Balanced 可让潜水员在最苛刻的条件下自由呼吸。超平衡一级头可在深水以及气瓶压力低时提供充足的气流。与完全可调二级头配对可保持不考虑气瓶压力时的持久性与轻松呼吸之间的平衡。易握呼吸阻力旋钮以及潜水/潜水前开关可让潜水员随时调整呼吸性能。

一级头

  • 高级气流设计和特殊的辅助箱可保证根据最大吸入气流将压力降到最低点。
  • 环保密封隔膜和弹簧可在冷水或者脏水中使用。
  • 自动润滑、带保护罩气瓶可提供超级性能,并减少保养次数。
  • DIN 200/300 阀体为不锈钢材质,因此螺口不易意外损坏。
  • 咬嘴采用 316 不锈钢制成便于更换。
  • 重量轻且外包防碰撞高弹性外壳。
  • 高压端口(HP)2 个
  • 低压端口(LP)4 个
  • 重量:590克(其中 DIN 重 450 克)

二级头

  • 超大、椭圆形隔膜提供自然机械优势可让您流畅自主呼吸.
  • 平衡活塞即使在气瓶压力低时也可保持呼吸阻力。
  • 呼吸调节器提供准确的微调。
  • 呼吸调节器根据入水量密封,防腐且可随时正常使用。
  • 易握旋钮可在带手套的情况下进行呼吸效果调节。
  • 潜水/潜水前调整开关调节Venturi气流效果以防止表面有自主流动。
  • 内部热交换可帮助减少在冷水域的冰冻现象。
  • 有两种规格排气阀可供选择。
  • 在其分类中相对较轻的二级头可减轻下巴疲劳状态。
  • 二级头套管可迅速与内部部件分开,可快速、方便地进行保养。
  • 不包括软管在内的重量为 170 克。
2nd stage Ellipse Balanced Many of the exclusive technical characteristics of Ellipse, covered by 4 international patents, have been transferred to this new second stage. Ellipse Balanced has a slightly larger casing which is made from a sound absorbing material , and a...

2nd stage Ellipse Balanced

Many of the exclusive technical characteristics of Ellipse, covered by 4 international patents, have been transferred to this new second stage.

Ellipse Balanced has a slightly larger casing which is made from a sound absorbing material, and a new diaphragm that further improves the already very low inhalation effort of Ellipse.

The weight is very low (the lightest in the category).

The pneumatic balancing system of the piston allows for constant performance at any depth and with any air pressure in the tanks.

An easy grip knob allows for the instant adjustment of the inhalation effort, even when wearing gloves, thus regulating it as first regulator or as spare regulator depending on the preferences of the user and the required use.

The regulation system is protected by a double seal and is fully protected from contact with water, thus maintaining smooth rotation even over time.

A small lever, located in the upper part of the casing, acts as a flow deviator and allows the Venturi effect to be adjusted. When placed in position (-) it functions as pre-dive, for getting into the water and the first stages of the dive, whilst when moved to (+) it allows the regulator to develop its maximum performance.

An internal heat exchanger optimises the performance of the regulator even in cold waters.  

The special study of air flows inside the casing has meant that absolutely natural, smooth and very silent breathing has been obtained.

The standard release baffle can be directly replaced by the user for a larger model which pushes the bubbles further way from the diver’s face.

The possibility of quickly removing the entire mechanical part from the casing significantly aids maintenance operations.

 

Technical Characteristics of the 2nd stage Ellipse Balanced with 1st stage MC9

  •  Average inhalation effort 3 mbar
  •  Average exhalation effort 8 mbar
  •  Average breathing labour 0.75  J/l
  •  Quantity of air supplied 2500 l/m (*)
  •  Weight without hose 170 g


(*) Values measured in compliance with standard UNI EN 250.  

 
1st stage MC9

 Hyper-balanced Diaphragm 1st stage with highly technological content that places it at the top of the Cressi range.

Very light body covered by a protective elastomer shell.

Cylinder sheathed in an antifriction and anticorrosion material that guarantees perfect sliding of the piston and long maintenance intervals.

The nozzle, made from 316 stainless steel, can be easily replaced, thus ensuring perfect air-tightness, even after many years of use.

Advanced research on the passage of internal air and a special assistance chamber have enabled the drop of pressure upon inhalation to be kept to a minimum, thus guaranteeing high performance in any situation.

Hyper-balancing allows for an increase of the intermediate pressure at maximum depths and lowering of the pressure in the tank, offering higher performance during the delicate ascent phase and at maximum depths. 

DIN 200/300 bar fitting in stainless steel which prevents deformation of the thread in the event that the regulator suffers any falls.

 

MC9 diaphragm 1st stage - Technical Features

 

  • Working pressure (INT connection): 0-232 bar
  • Working pressure (DIN connection): 0-300 bar
  • Calibration pressure: 10 bar
  • Calibration adjustment range: +/- 0.5 bar
  • Air supply:  4500 l/min   (*)
  • High pressure seats (HP)    2
  • Low pressure seats (LP)    4
  • Weight with INT connection: 590 g
  • Wight with DIN connection: 450 g

 

 (*)values measured at LP seat outlet with second stage connected and 150 bar pressure in the cylinders.

 


 

 

 

Made In Italy