The Cherokee is the evolution of the Geronimo model, with the same basic characteristics and the addition of many new technological innovations.
It has kept the traditional qualities of Cressi spear guns, such as durability and ergonomics, and has been improved with often exclusive cutting-edge technical solutions.
New butt evolved from that used in the Geronimo model, with multiple enhancements and anatomical modifications to improve grip, handling and resistance to bending.
Over-sized enhanced trigger guard and trigger aligned with the barrel to eliminate inertia when firing. Integrated swivel safety, thumb activated.
New integrated rubber load assist.
Shaft coupling point 5 cm back to optimize the bands’ dynamic propulsion and to prolong it for the longer barrel.
Enhanced and simplified assembly with the barrel to eliminate bending. Incorporates new super robust and reliable coupling system for the reel.
Rounded wings to position the cord when loading and to prevent interference with coupling the wishbone.
New metal mechanism developed 100% by Cressi Italia.
It combines stainless steel and exclusive self-lubricating Teflon elements to minimize friction.
It has an extraordinary balance between trigger sensitivity and accidental decoupling resistance, even when used with powerful dual bands.
Lateral stainless steel retractable thread loop. Anticorodal Ø28 mm aluminum barrel derived from the model: Mohicano.
Integrated low-friction guide as the shaft only rests on the two outer corners.
The lower part is reinforced by additional thickness.
This combination enables the spear gun to remain extraordinarily easy to handle while being more rigid than spear guns that are much larger in diameter.
Muzzle: minimal but very robust opening so dual bands can be used.
Its cobra head design softens the angle of the bands so that they work more effectively without unnecessary friction or tension that could reduce the life of the product.
It is designed so that if used with dual bands, both work equally without any interference.
The muzzle incorporates field lead on the lower part in stainless steel that also functions as a thread loop when dual pass is being used.
Bands: pure USA latex Ø17 mm bands with Dyneema wishbone.
Dual band possible.
Shaft: standard barbed, Ø6,5 mm. Dark tempered 16 4PH steel.
Measurements: 75, 90, 100, 110 cm.